Scheffer / Global Web Finishing Archives

Nip Wheel – Rubber Covered

Part #: 1-1897 & 1-5246

For Use With: Scheffer, Global Web Finishing and I-Web equipment.

Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.102″ ID x .750″ Wide
– .475″ bearing ID
– High-quality, double sealed, 6001RS low friction bearing. – Qty 2
– Covered with clear rubber urethane material.

Add to Quote

Bearing – 1.375″ OD x .625″ ID

Part #: 1623-RS

For Use With: TW-300W-04 Nip Wheel.

Features:
– Replacement bearing.
– 1.375″ OD x .625″ ID x .435″ Wide.
– High-quality, double sealed, 1623-RS low friction bearing.
– Two used per nip wheel.

Add to Quote

20″ Knife Holder

Part #: 20-1251

For Use With: Scheffer rotary cutters with 5/8″ knife cylinder undercut.

Features:
– Standard replacement 20″ knife holder assembly.
– Utilizes standard replacement 20″ x .625″ high (6 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Add to Quote

20″ Bridge Spacer

Part #: 20-1294

For Use With: Scheffer rotary cutters with 5/8″ knife cylinder undercut.

Features:
– Standard replacement 20″ bridge spacer.
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Doctor Blade – 41.88″ Long (9 Notches)

Part #: 20-2600

For Use With: Scheffer / Global Web Finishing UV Coater / Gluer.

Features:
– 41.88″ Long x 1.50″ Tall
– 9 notches.
– Standard replacement doctor blade.

Add to Quote

Doctor Blade – 44.88″ Long (9 Notches)

Part #: 20-2602

For Use With: Scheffer / Global Web Finishing UV Coater / Gluer.

Features:
– 44.88″ Long x 1.50″ Tall
– 9 notches.
– Standard replacement doctor blade

Add to Quote

Shear Slitter Anvil Knife – 5.905″OD

Part #: 5905-400-100-SA

For Use With: Scheffer / Global Web Finishing inline shear slitting station.

Features:
– Premium anvil (bottom) knife.
– 5.905″ OD x 4.00″ ID x 1.00″ Wide
– Split anvil knife (two-halves).
– Three set screws.
– Double edged.

Compare to: Scheffer Part# 540059066 or 2-6065

Our anvil knives are manufactured to exacting tolerances from high quality D2 tool steel.

Add to Quote

Bearing – 1.102″ OD X .475 ID

Part #: 6001-2RS

For Use With: 1-1897 & 1-5246 and TW-300W-07 Nip Wheels.

Features:
– Replacement bearing.
– 1.102″ OD x .475″ ID x .3125″ Wide.
– High-quality, double sealed, 6001RS low friction bearing.
– Two used per nip wheel.

Add to Quote

Custom Chip Size Spacers

Part #: 66e4989c53cb9

For Use With: 12″ KCO Style Double (Chip) Knife Holder Assembly

Features:
– 12″ Long
– Custom chip spacers can be manufactured in sizes from 1/4″ (.250″) – 1/2″ (.500″).

* Please specify chip size and circumference of rotary cutter when ordering.

Add to Quote

Mounting Post

Part #: A-15715

For Use With: Scheffer rotary plows – 6.00″ diameter.

Features:
– Standard replacement mounting post for 5.00″ diameter plow puck.

Add to Quote

Retaining Washer

Part #: A10473

For Use With: Scheffer rotary plows – 6.00″ diameter.

Features:
– Positioned between the rotary plow puck and the cap screw.

Add to Quote

Base Mounting Plate

Part #: A20235

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.

Features:
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Pivot Stud

Part #: A27320

For Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.

Features:
– Replacement threaded pivot post stud.
– Screws into the internal plow puck mounting bracket.
– Used to mount plow puck to rotary plow assembly.

Add to Quote

Slotted Air Nozzle

Part #: AZ-125-512APT

For Use With: Scheffer rotary cutter chip removal.

Features:
– Standard replacement slotted air nozzle for chip blast/removal.

Add to Quote

Wide Air Nozzle

Part #: AZ-250-512

For Use With: Scheffer rotary cutter chip removal.

Features:
– Standard replacement air nozzle for chip blast/removal.

Add to Quote

Axle Shaft

Part #: B01545

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.

Features:
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Knob

Part #: B01552

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.

Features:
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Linkage – Actuating Arm

Part #: B09106 & B09110

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.

Features:
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Mounting Collar – Split

Part #: B10818

Replacement split mounting collar for use with 17.750″/35.500″ or 17.795″/35.590″ circumference kicker wheel assembly:

– Standard replacement split mounting collar.
– For use with kicker wheel assembly Part# C26356-1.

Add to Quote

Side Plate

Part #: B20211

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.

Features:
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Stud Rack

Part #: B20840-3

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.

Features:
– 20.5″ long.
– Fits inside plow stem to connect turn knob to actuating arm.
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Threaded Extension Shaft

Part #: B25916

For Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ & 6.00″ diameter.

Features:
– 1.377″ OD
– 4.00″ overall length

Add to Quote

Mounting Collar – Split

Part #: B26357

Replacement split mounting collar for use with 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 625mm/1250mm or 630mm/1260mm circumference kicker wheel assembly:

– Standard replacement split mounting collar.
– For use with kicker wheel assembly Part#’s C26355, C26686 & C33204.

Add to Quote

Block Adjustment Stop

Part #: B42700

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.

Features:
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Collar

Part #: B42709

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.

Features:
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Bearing

Part #: BB-21446

For Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.

Features:
– Internal replacement bearing.
– Metal shielded low friction bearing that meets or exceeds OEM specifications.

Add to Quote

Bearing – 1.125″ OD X .500″ ID

Part #: BR8-002 or R8RS

For Use With:
– WPM, AGM, Baldwin, ILF, Versa Tech and Vits 2.50″ OD Slit/Perf/Score Wheels.
– TW-250R-01, TW-250Y-03, & TW-250W-02 Nip Wheels.
– TW-300W-03 Nip Wheel.
– TW-500 Infeed Wheel.

Features:
– Replacement bearing.
– 1.250″ OD x .500″ ID x .300″ Wide.
– High-quality, double sealed, R8RS low friction bearing.
– One used per wheel.

Add to Quote

Air Trolley Assembly

Part #: C-41061

For Use With: Scheffer / Global Web Finishing angle bars, seam gluers, prefolders, pattern perforators, and plow towers.

Features:
– Standard single wheel air trolley assembly.
– 2″ round bar holder frame.
– Complete assembly includes; air cylinder, sleeve valve, air regulator and compression fitting.
– Manufactured to meet or exceed OEM specifications.

Compare to: Scheffer Part# C41061

Add to Quote

Air Slitter/Perf/Score Wheel Holder Assembly

Part #: C-41062

For Use With: Scheffer / Global Web Finishing angle bars, seam gluers, prefolders, pattern perforators, and plow towers.

Features:
– Standard slitter/perf/score wheel air trolley assembly.
– 2″ round bar holder frame.
– Complete assembly includes; air cylinder, sleeve valve, and compression fitting.
– Guard Not Included.
– Manufactured to meet or exceed OEM specifications.

Compare to: Scheffer Part# C41062

Add to Quote

Air Cylinder

Part #: C-802L

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement air cylinder.

Add to Quote

Guard

Part #: C03826

For Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement guard.

Add to Quote

Support Roller – 4.25″ Diameter x 3.12″ Wide

Part #: C09116 or 09123-2

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ diameter.

Features:
– 4.25″ OD x 1.377″ ID x 3.12″ Wide
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.

Add to Quote

Support Roller – 4.25″ Diameter x 1.75″ Wide

Part #: C09121 or 09122-2

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ diameter.

Features:
– 4.25″ OD x 1.377″ ID x 1.75″ Wide
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.

Add to Quote

Rotary Plow Assembly – 6.00″ Diameter

Part #: C11426

For Use With: Scheffer rotary plows – 6.00″ diameter.

Features:
– Replacement rotary plow assembly.
– 6.00″ support roller OD.
– 5.00″ OD single beveled rotary plow puck designed to greatly reduce guessing, cracking, wrinkling and marking on most paper stocks.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.

Add to Quote

Scale

Part #: C14786

Replacement 360 degree scale for use with 17.750″/35.500″ or 17.795″/35.590″ circumference kicker wheel assembly:

– 360 degree adhesive mounted replacement scale.
– For use with kicker wheel assembly Part# C26356-1.

Add to Quote

Scale

Part #: C14808

Replacement 360 degree scale for use with 22.750″/45.500″, 22.776″/45.552″ or 22.8375″/45.675″ circumference kicker wheel assembly:

– 360 degree adhesive mounted replacement scale.
– For use with kicker wheel assembly Part# C26355.

Add to Quote

Scale

Part #: C14808-630

Replacement 360 degree scale for use with 625mm/1250mm or 630mm/1260mm circumference kicker wheel assembly:

– 360 degree adhesive mounted replacement scale.
– For use with kicker wheel assembly Part# C26686 & C33204

Add to Quote

Support Roller – 6.00″ Diameter x 2.00″ Wide

Part #: C15712

For Use With: Scheffer plow folding equipment – 6.00″ diameter.

Features:
– 6.00″ OD x 2.00″ Wide x Beveled ID
– Replacement support roller only for use with 6.00″ diameter rotary plow assembly.
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Skate Assembly – Single Wheel

Part #: C17051

For Use With: Scheffer rotary cutters with skate delivery tables.

Features:
– Standard replacement skate assembly – single wheel.
– Precision machined to meet or exceed OEM specifications.

Compare to: Scheffer Part# C17051

Add to Quote

Web Deflector (Whale Tail)

Part #: C17967

For Use With: Scheffer rotary cutter delivery tables.

Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.

Compare to: Scheffer Part# C17967

Add to Quote

Web Deflector (Whale Tail)

Part #: C17969

For Use With: Scheffer rotary cutter delivery tables.

Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.

Compare to: Scheffer Part# C17969

Add to Quote

12″ Lead Edge T-Bar/Front Plate

Part #: C19560 or SKFP-12-01L

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement 12″ lead edge T-Bar/Front Plate for use with traditional style knife holders.
– Precision machined from steel to meet or exceed OEM specifications.
– Durable

Compare to Scheffer Part# C19560

Add to Quote

12″ Trail Edge T-Bar/Front Plate

Part #: C19561 or SKFP-12-02T

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement 12″ trail edge T-Bar/Front Plate for use with traditional style knife holders.
– Precision machined from steel to meet or exceed OEM specifications.
– Durable

Compare to Scheffer Part# C19561

Add to Quote

Web Deflector (Whale Tail)

Part #: C19708

For Use With: Scheffer rotary cutter delivery tables.

Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.

Compare to: Scheffer Part# C19708

Add to Quote

Web Deflector (Whale Tail)

Part #: C19709

For Use With: Scheffer rotary cutter delivery tables.

Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.

Compare to: Scheffer Part# C19709

Add to Quote

Internal Plow Puck Mounting Bracket

Part #: C21434

For Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.

Features:
– Replacement internal housing bracket to mount rotary plow puck.

Add to Quote

Rotary Plow Assembly – 4.25″ Diameter

Part #: C21446

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ diameter.

Features:
– 4.25″ support roller OD.
– 3.625″ OD double beveled rotary plow puck designed to greatly reduce gusseting, cracking, wrinkling and marking on most paper stocks.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.

Add to Quote

Kicker Wheel Assembly For 22.750″/45.500″, 22.776″/45.552″ or 22.8375″/45.675″ Circ. Rotary Cutters

Part #: C26355 or B26357

Standard replacement kicker wheel (knock-down) assembly for use Scheffer rotary cutters with a 22.750″/45.500″, 22.776″/45.552″ or 22.8375″/45.675″ circumference:

– 22.750″/45.500″, 22.776″/45.552″ or 22.8375″/45.675″ circumference.
– Includes metal mounting collar.

C26355 & B26357 kicker wheel assembly is for use with full-web (16 page) delivery tables.

Add to Quote

Kicker Wheel Assembly For 17.750″/35.500″ or 17.795″/35.590″ Circ. Rotary Cutters

Part #: C26356-1

Standard replacement kicker wheel (knock-down) assembly for use Scheffer rotary cutters with a 17.750/35.500″ or 17.795″/35.590″ circumference:

– 17.750″/35.500″ or 17.795″/35.590″ circumference.
– Includes metal mounting collar.

C26356-1 kicker wheel assembly is for use with half-web (8 page) delivery tables.

Add to Quote

Kicker Wheel Assembly For 625mm/1250mm or 630mm/1260mm Circ. Rotary Cutters

Part #: C26686 or C33204

Standard replacement kicker wheel (knock-down) assembly for use Scheffer rotary cutters with a 625mm/1250mm or 630mm/1260mm circumference:

– 625mm/1250mm or 630mm/1260mm circumference.
– Includes metal mounting collar.

C26686 & C33204 kicker wheel assemblies are for use with full-web (16 page) delivery tables.

Add to Quote

Web Deflector (Whale Tail)

Part #: C32493

For Use With: Scheffer rotary cutter delivery tables.

Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.

Compare to: Scheffer Part# C32493

Add to Quote

3.70″ Diameter Plow Puck

Part #: C41222

For Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.

Features:
– Alternative replacement plow puck.
– 3.70″ OD
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.
– Double beveled which greatly reduces gusseting, cracking, wrinkling and marking on most paper stocks.

Add to Quote

Axle

Part #: C44477

For Use With: Scheffer rotary cutters with skate delivery tables.

Features:
– Standard replacement axle for single wheel skate assembly.
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Bearing – Skate Wheel

Part #: C60355

For Use With: Scheffer rotary cutters with skate delivery tables.

Features:
– Standard replacement bearing for single wheel skate assembly.
– Two bearings needed per skate wheel.

Add to Quote

Metal Turn Handle

Part #: C64835

For Use With: Scheffer rotary cutters with skate delivery tables.

Features:
– Standard replacement metal turn handle for single wheel skate assembly.

Add to Quote

Spring

Part #: C90805

For Use With: Scheffer rotary cutters with skate delivery tables.

Features:
– Standard replacement rear tension spring for single wheel skate assembly.

Add to Quote

Plastic Turn Knob

Part #: C94052

For Use With: Scheffer rotary cutters with skate delivery tables.

Features:
– Standard replacement plastic turn knob for single wheel skate assembly.

Add to Quote

Creasing (Score) Ribs

Part #: CR-1032

For Use With: Scheffer / Global Web Finishing inline scoring units.

Features:
– Standard replacement creasing (score) rib.
– Used to score medium to heavy paper stocks.
– Greatly reduces gusseting, cracking, wrinkling and marking on medium to heavy paper stocks.

Compare to: Part# M-34

Add to Quote

Creasing (Score) Ribs

Part #: CR-1034

For Use With: Scheffer / Global Web Finishing inline scoring units.

Features:
– Standard replacement creasing (score) rib.
– Used to score heavy to extra heavy paper stocks.
– Greatly reduces gusseting, cracking, wrinkling and marking on heavy to extra heavy paper stocks.

Compare to: Part# M-33

Add to Quote

Air Orifice Regulator

Part #: D-15-BR

For Use With: Air slitter/perf/score wheel assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement air orifice regulator.
– Connects compression fitting to sleeve valve.

Add to Quote

Compression Fitting

Part #: D-150C

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement compression fitting.

Add to Quote

Female Coupler

Part #: D-150F

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement female coupler.

Add to Quote

Male Barbed Fitting

Part #: D-150M

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement male barbed fitting.

Add to Quote

Branched Tee

Part #: D-150T

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement branched tee.

Add to Quote

Support Roller – 6.00″ Diameter x 3.12″ Wide

Part #: D1506

For Use With: Scheffer plow folding equipment – 6.00″ diameter.

Features:
– 6.00″ OD x 1.377″ ID x 3.12″ Wide
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.

Add to Quote

Support Roller – 6.00″ Diameter x 1.75″ Wide

Part #: D1506-1

For Use With: Scheffer plow folding equipment – 6.00″ diameter.

Features:
– 6.00″ OD x 1.377″ ID x 1.75″ Wide
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.

Add to Quote

Support Roller – 6.00″ Diameter x 1.31″ Wide

Part #: D1551

For Use With: Scheffer plow folding equipment – 6.00″ diameter.

Features:
– 6.00″ OD x 1.377″ ID x 1.31″ Wide
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.

Add to Quote

12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 22.776″/45.552″ Circ.

Part #: D16761 or SKB-12-450

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 22.776″/45.552″ Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Compare to: Scheffer Part# D16761

Add to Quote

12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 22.8375″/45.675″ Circ.

Part #: D17116 or SKB-12-450

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 22.8375″/45.675″ Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Compare to: Scheffer Part# D17116

Add to Quote

12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 22.750″/45.500″ Circ.

Part #: D17498 or SKB-12-450

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 22.750″/45.500″ Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Compare to: Scheffer Part# D17498

Add to Quote

12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 630mm/1260mm Circ.

Part #: D18286 or SKB-12-49606

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 630mm/1260mm Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Compare to: Scheffer Part# D18286

Add to Quote

12″ Traditional Scheffer / Global Web Finishing Knife Holder – 17.750″/35.500″ & 17.795″/35.590″ Circ.

Part #: D18384 or SKB-12-350

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 17.750″/35.500″ & 17.795″/35.590″ Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Compare to: Scheffer Part# D18384

Add to Quote

Support Roller – 4.25″ Diameter x 1.31″ Wide

Part #: D20086

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ diameter.

Features:
– 4.25″ OD x 1.377″ ID x 1.31″ Wide
– Plow stem support rollers (fit between vertical plow stem bracket).
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.

Add to Quote

Web Deflector (Whale Tail)

Part #: D24035

For Use With: Scheffer rotary cutter delivery tables.

Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.

Compare to: Scheffer Part# D24035

Add to Quote

12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 625mm/1250mm Circ.

Part #: D29045 or SKB-12-49606

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 625mm/1250mm Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Compare to: Scheffer Part# D29045

Add to Quote

Shear Slitter Dish Knife – 5.905″ OD – Scheffer

Part #: DK-150-80-25

For Use With: Inline shear slitting and WPM & Scheffer / Global Web Finishing inline shear slitting stations.

Features:
– Premium male dish knife.
– 5.905″ OD x 3.149″ ID x .098″ Thick with Keyway

Compare to: Scheffer Part# 128216

Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

Shear Slitter Dish Knife – 5.00″ OD – Scheffer

Part #: DK-5000-05

For Use With: Inline shear slitting and Scheffer / Global Web Finishing inline shear slitting stations.

Features:
– Premium male dish knife.
– 5.00″ OD x 2.875″ ID x .059″ Thick

Compare to: Scheffer Part# 1-1550

Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

Brass Hold Down Nut – Scheffer (Metric)

Part #: DTN-200M

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Metric (M6 x 1.0) replacement brass dovetail hold down nut.
– For use with both traditional and KCO style Scheffer knife holders.

Compare to: Scheffer Part# A32127

Add to Quote

Brass Dovetail Hold Down Nut

Part #: DTN-200S

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement brass dovetail hold down nut.
– For use with both traditional and KCO style Scheffer / Global Web Finishing knife holders.

Compare to: Scheffer Part# A16736

Add to Quote

Holder Frame

Part #: F-8212

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement 2″ round bar holder frame.

Add to Quote

Glue Skiver – Scheffer – Right Hand

Part #: GS-004RS

For Use With: Scheffer Remoist and Seam (Wet) Gluers:

Features:
– Standard replacement right handed glue skiver/wiper.
– Assists in preventing glue slinging/spitting.
– Reduces gluer cleanup.

Compare to: Scheffer Part# B31572

Add to Quote

Glue Skiver – Scheffer – Left Hand

Part #: GS-005LS

For Use With: Scheffer Remoist and Seam (Wet) Gluers:

Features:
– Standard replacement left handed glue skiver/wiper.
– Assists in preventing glue slinging/spitting.
– Reduces gluer cleanup.

Compare to: Scheffer Part# B31572

Add to Quote

Glue Skiver – Scheffer Portable Flex Gluers

Part #: GS-006

For Use With: Scheffer Portable Flex Gluers:

Features:
– Standard replacement glue skiver/wiper.
– Assists in preventing glue slinging/spitting.
– Reduces gluer cleanup.

Compare to: Scheffer Part# B34289

Add to Quote

Metal Turn Handle

Part #: H-1075

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement metal turn handle.

Add to Quote

Male Pipe Fitting

Part #: H-125-2

For Use With: Air trolley wheel assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement male pipe fitting.
– Connects air regulator to sleeve valve.

Add to Quote

Pneumatic Hose

Part #: H-1552

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement pneumatic hose.

Add to Quote

Mounting Cap Screw For T-Bars/Front Plates

Part #: HDN-10-24

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement mounting cap screw for traditional style knife holder T-Bars/Front Plates.
– Used to mount T-Bars/Front Plates to traditional style knife holder body.

Add to Quote

Mounting Cap Screw

Part #: HDN-250-28

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement mounting cap screw for traditional style knife holder body.

Add to Quote

Key Slitter

Part #: K-16440

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement key slitter.

Compare to: Scheffer Part# A16440

Add to Quote

Metal Turn Knob

Part #: K-170

For Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement threaded metal turn knob.

Add to Quote

Barrel Insert

Part #: KCO-1001-B

For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement barrel insert for use with Vits and KCO style Scheffer / Global Web Finishing knife holders.

Add to Quote

Tab Plunger

Part #: KCO-1002-P

For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement tab plunger for use with Vits and KCO style Scheffer / Global Web Finishing knife holders.

Add to Quote

Set Screw

Part #: KCO-1004-S

For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement set screw for use with Vits and KCO style Scheffer / Global Web Finishing knife holders.

Add to Quote

Spring

Part #: KCO-1006-SP

For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement spring for use with Vits and KCO style Scheffer / Global Web Finishing knife holders.

Add to Quote

12″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly – 17.750″/35.500″ & 17.795″/35.590″ Circ.

Part #: KCO-12-35500

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 17.750″/35.500″ & 17.795″/35.590″ Circumference.
– Standard replacement 12″ KCO style knife holder assembly.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Compare to: Scheffer Part# D37398

Add to Quote

12″ KCO Style Scheffer / Global Web Finishing Knife Holder Complete Assembly – 35.500″ Circ.

Part #: KCO-12-35500KA

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 17.750″/35.500″ & 17.795″/35.590″ Circumference.
– Standard replacement 12″ KCO style knife holder complete assembly.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Includes all mounting hardware (mounting cap screws, split washers, retaining washers, and brass dovetail nuts).
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Available in other widths such as 20″, 24″, and 28″.

Add to Quote

12″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly – 22.750″/45.500″ – 24.803″/49.606″ Circ.

Part #: KCO-12-45-49606

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– Standard replacement 12″ KCO style knife holder assembly.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Please specify circumference of rotary cutter when ordering.

Compare to: Scheffer Part# D37374

Add to Quote

12″ KCO Style Scheffer / Global Web Finishing Knife Holder Complete Assembly – 45.500″- 49.606″ Circ.

Part #: KCO-12-45-49606KA

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– Standard replacement 12″ KCO style knife holder complete assembly.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Includes all mounting hardware (mounting cap screws, split washers, retaining washers, and brass dovetail nuts).
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Available in other widths such as 20″, 24″ and 28″.

Add to Quote

Reinforcement Front Plate

Part #: KCO-12-FP

For Use With: 12″ KCO Style Knife Holders.

Features:
– Standard replacement reinforced front plate.
– 12″ Long.
– Provides additional stability and reduces flexing and vibration of cutting rule in heavier cutting applications.
– Precision machined to meet or exceed OEM specifications.

Add to Quote

20″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly – 22.750″/45.500″ – 24.803″/49.606″ Circ.

Part #: KCO-20-45-49606

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– Standard replacement 20″ KCO style knife holder assembly.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 20″ (6 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Please specify circumference of rotary cutter when ordering.

Compare to: Scheffer Part# D36843 & D37332

Add to Quote

24″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly – 17.750″/35.500″ & 17.795″/35.590″ Circ.

Part #: KCO-24-35500

Exclusive Walt Powley Inline 24″ KCO knife holder assembly.

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 17.750″/35.500″ & 17.795″/35.590″ Circumference.
– 24″ KCO style knife holder assembly.
– Mount one knife holder, instead of two, when using a 24″ long cutting blade.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 24″ (8 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Add to Quote

24″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly – 22.750″/45.500″ – 24.803″/49.606″ Circ.

Part #: KCO-24-45-49606

Exclusive Walt Powley Inline 24″ KCO knife holder assembly.

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– 24″ KCO style knife holder assembly.
– Mount one knife holder, instead of two, when using a 24″ long cutting blade.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 24″ (8 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Please specify circumference of rotary cutter when ordering.

Add to Quote

12″ KCO Style – Double (Chip) Knife Holder Assembly – 17.750″/35.500″ & 17.795″/35.590″ Circ.

Part #: KCO-250-35500

Exclusive Walt Powley Inline design double (chip) knife holder assembly for use with Scheffer / Global Web Finishing rotary cutters.

Features:
– 17.750″/35.500″ & 17.795″/35.590″ Circumference.
– Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
– Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
– Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), chip spacer, and front plate.
– Utilizes standard replacement 12″ (4 notch) cutting blade.

Advantages:
– Fast make-ready – mount only one knife holder, instead of two, when taking chips.
– Make-ready chip area with a single strip of foam rubber – Save time and money by drastically reducing the need to cut, fold, trim, etc. multiple layers of foam rubber.
– Greatly assists chip placement onto stripper pins for successful and consistent chip removal.
– Provides for a rapid changeover of replacement cutting blades without removing the holder from the knife cylinder.

20″ & 24″ Length KCO Style Double (Chip) Knife Holder Assembly – Also Available.

* Please specify chip size when ordering.

Add to Quote

12″ KCO Style – Double (Chip) Knife Holder Assembly – 22.750″/45.500″ – 24.803″/49.606″ Circ.

Part #: KCO-250-45500

Exclusive Walt Powley Inline design double (chip) knife holder assembly for use with Scheffer / Global Web Finishing rotary cutters.

Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
– Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
– Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), chip spacer, and front plate.
– Utilizes standard replacement 12″ (4 notch) cutting blade.

Advantages:
– Fast make-ready – mount only one knife holder, instead of two, when taking chips.
– Make-ready chip area with a single strip of foam rubber – Save time and money by drastically reducing the need to cut, fold, trim, etc. multiple layers of foam rubber.
– Greatly assists chip placement onto stripper pins for successful and consistent chip removal.
– Provides for a rapid changeover of replacement cutting blades without removing the holder from the knife cylinder.

20″, 24″ & 28″ length KCO Style Double (Chip) Knife Holder Assembly – Also available.

* Please specify chip size when ordering.

Add to Quote

Modified Swing Hinge Connector

Part #: KCO-250-E

For Use With: KCO Style Double (Chip) Knife Holder Assembly

Features:
– Modified swing hinge connector allows for 1/4″ – 3/8″ chip spacer and front plate lockup.

Add to Quote

28″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly

Part #: KCO-28-45-49606

Exclusive Walt Powley Inline 28″ KCO knife holder assembly.

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– 28″ KCO style knife holder assembly.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 28″ (10 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Please specify circumference of rotary cutter when ordering.

Add to Quote

Modified Swing Hinge Connector

Part #: KCO-500-E

For Use With: KCO Style Double (Chip) Knife Holder Assembly

Features:
– Modified swing hinge connector allows for 1/2″ chip spacer and front plate lockup.

Add to Quote

Split Washer

Part #: KCO-SW250

For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement split washer for Vits and KCO style Scheffer / Global Web Finishing knife holders.
– Split washer is positioned below the mounting cap screw and above the retaining washer within the knife holder body.

Add to Quote

Retaining Washer

Part #: KCO-W375

For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement stainless steel retaining washer for Vits and KCO style Scheffer / Global Web Finishing knife holders.
– Retaining washer is positioned between the split washer and knife holder body.

Add to Quote

Piston Linkage

Part #: L-1540

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement air cylinder piston linkage assembly.
– Connects air cylinder to pivot arm.

Add to Quote

Lower Tape Tensioner Assembly

Part #: LTA-01

For Use With: Scheffer and Global Web Finishing T.E.D Delivery Tables or TDT Tape Delivery Tables

Features:
– Standard replacement lower tape tensioner assembly.
– Manufactured to meet or exceed OEM specifications.

Compare to: Scheffer Part# 02-0066-1

Add to Quote

Shoulder Mounting Bolt

Part #: MB-425

For Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.

Features:
– Used to mount plow puck to rotary plow assembly.

Add to Quote

Knife Locator Clips

Part #: MC-042

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement die rule knife locator clip.
– Mounted to knife locator drop down bar.

Compare to: Scheffer Part# B16912

Add to Quote

20″ Cutting Blade – 5/8″ High

Part #: MCB-625-20-01

For Use With: Scheffer rotary cutters with 5/8″ knife cylinder undercut.

Features:
– 20″ Long x .625″ High x 6 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.

Compare to: Scheffer Part# 20-1247

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

Chip Filler

Part #: MCS-XXX-XX-XX

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Can be manufactured for 35.500″-52.500″ circumference rotary cutters.
– Manufactured in custom chip sizes from 1/4″ and up.
– Reduces make-ready time by eliminating need to manipulate multiple layers of make-ready material.

Please specify circumference of rotary cutter, chip size, and chip filler width when ordering.*

Add to Quote

Micro/Mini Perf Wheels – 3.03″ OD

Part #: N/A

For Use With: Scheffer, Global Web Finishing & I-Web equipment.

Features:
– Standard replacement micro/mini perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 30, 45, 50, 66, 72 Teeth (Cuts) Per Inch available.
– Tie as small as .005″

Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.

Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!

Add to Quote

Roll Pin

Part #: P-529

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement roll pin.
– Inserts into pivot arm.

Add to Quote

Pivot Pin

Part #: P-5345

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement pivot pin.
– Connects holder frame to pivot arm.

Add to Quote

Snap Ring/Pivot Pin

Part #: P-5399

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement snap ring for pivot pin.
– Two snap rings needed per assembly.

Add to Quote

Pivot Pin

Part #: P-570

For Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement pivot pin.
– Connects holder frame to pivot arm.

Add to Quote

Pivot Arm

Part #: PA-5271

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement pivot arm.

Add to Quote

Pinion Gear

Part #: PG-09

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.

Features:
– Replacement Pinion Gear.
– 3.44″ Long.
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Front Plate

Part #: PL-250-12

For Use With: 12″ KCO Style Double (Chip) Knife Holder Assembly

Features:
– Standard replacement front plate.
– 12″ Long

Add to Quote

Plow Shoes

Part #: Please Call

For Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ diameter.

Features:
– Best used when plow folding light weight or single thickness paper.
– Precision machined and assembled from steel to meet or exceed OEM specifications.
– Custom manufactured left or right handed to customer specified widths and lengths.
– Fits .750″ diameter mounting shafts.

Custom plow shoe widths and lengths can be manufactured upon request.

Add to Quote

Perf Wheel – 3.03″ OD x 10 TPI

Part #: PW-10-303-866

For Use With: Scheffer, Global Web Finishing & I-Web equipment.

Features:
– Standard replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 10 TPI or teeth (cuts) per inch
– Size of cut = .069″
– Size of tie = .031″
– Teeth per wheel = 95

Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.

Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!

CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!

Add to Quote

Perf Wheel – 3.03″ OD x 12 TPI

Part #: PW-12-303-866

For Use With: Scheffer, Global Web Finishing & I-Web equipment.

Features:
– Standard replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 12 TPI or teeth (cuts) per inch
– Size of cut = .052″
– Size of tie = .031″
– Teeth per wheel = 114

Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.

Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!

CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!

Add to Quote

Perf Wheel – Cameron – 3.03″ OD x 16 TPI

Part #: PW-16-303-866

For Use With: Scheffer, Global Web Finishing & I-Web equipment.

Features:
– Standard Cameron style replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 16 TPI or teeth (cuts) per inch
– Size of cut = .031″
– Size of tie = .031″
– Teeth per wheel = 152

Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.

Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!

CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!

Add to Quote

Perf Wheel – Cameron – 3.03″ OD x 8 TPI

Part #: PW-8-303-866

For Use With: Scheffer, Global Web Finishing & I-Web equipment.

Features:
– Standard Cameron style replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 8 TPI or teeth (cuts) per inch
– Size of cut = .062″
– Size of tie = .062″
– Teeth per wheel = 76

Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.

Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!

CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!

Add to Quote

Quick Change Screw Housing Assembly – .866″ Bore

Part #: QC-614

For Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement “quick change” threaded screw housing assembly for use with .866″ ID slitter, perf, and score wheels.
– Includes knob, spring, screw housing, axle, slotted washer, two bearings, and two snap rings.

Add to Quote

Quick Change Screw Housing Assembly – .748″ Bore

Part #: QC-614-748

For Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement “quick change” threaded screw housing assembly for use with .748″ ID slitter, perf, and score wheels.
– Includes knob, spring, screw housing, axle, slotted washer, two bearings, and two snap rings.

Add to Quote

Air Regulator

Part #: R-20K

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement air regulator.

Add to Quote

5.00″ Diameter Plow Puck

Part #: RP-02C / C11428

For Use With: Scheffer rotary plows – 6.00″ diameter.

Features:
– Standard replacement plow puck.
– 5.00″ OD
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.
– Single beveled which greatly reduces gusseting, cracking, wrinkling and marking on heavier paper stocks.

Add to Quote

3.625″ Diameter Plow Puck

Part #: RP-03S / C21438

For Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.

Features:
– Standard replacement plow puck.
– 3.625″ OD
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.
– Double beveled which greatly reduces gusseting, cracking, wrinkling and marking on heavier paper stocks.

Add to Quote

Axle/Nip Wheel

Part #: S-528A

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement nip wheel mounting axle.
– Connects nip wheel to pivot arm.

Add to Quote

Axle – .748″ Bore

Part #: SA-748

For Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement axle for use with .748″ ID slitter, perf, and score wheels.

Add to Quote

Axle – .866″ Bore

Part #: SA-866

For Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement axle for use with .866″ ID slitter, perf, and score wheels.

Add to Quote

Knife Cylinder Spacer

Part #: SBS-XXX-XX-XX

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Can be manufactured for 35.500″-52.500″ circumference rotary cutters.
– Designed to bridge gap between knife blocks.
– Eliminates need for multiple layers of make ready foam.
– Designed for use with only one layer of make ready foam or Velcro.
– Reusable, long lasting, and more cost effective than machined metal spacers.
– Three finger access holes for dovetail nut positioning.
– Precision molded to meet or exceed OEM specifications.

Please specify circumference of rotary cutter and desired plate width and length when ordering.*

Add to Quote

Score Wheel -Cameron – 3.03″ OD x .748″ ID

Part #: SC-303-748-031

For Use With: Scheffer, Global Web Finishing & I-Web equipment.

Features:
– Standard Cameron style replacement score wheel.
– 3.03″ OD x .748″ ID x .244″ Thick
– Score radius = .041″
– Used to reduce gusseting, cracking, wrinkling and marking when plow folding on heavier paper stocks.
– Manufactured to exacting tolerances from premium quality 52100 steel.

Add to Quote

Score Wheel – Cameron – 3.03″ OD x .866″ ID

Part #: SC-303-866-031

For Use With: Scheffer, Global Web Finishing & I-Web equipment.

Features:
– Standard Cameron style replacement score wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– Score radius = .041″
– Used to reduce gusseting, cracking, wrinkling and marking when plow folding on heavier paper stocks.
– Manufactured to exacting tolerances from premium quality 52100 steel.

Add to Quote

Chip Removal Brush

Part #: SCRB-001

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement chip removal brush
– Durable white delrin split core (two part) body.
– 4.375″ OD x 1.250″ ID x 1.50″ Wide
– .375″ high black nylon heavy duty bristles.

Compare to: Scheffer Part# C15286

Add to Quote

Die Rule Cutting Blade – 12″

Part #: SDR-012

For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

Features:
– 12″ Long x .875″ High with 4 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

12″ – Heavy Duty Cutting Blade

Part #: SDR-012-04

Walt Powley Inline’s exclusive heavy duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.

Features:
– 12″ Long x .875″ High with 4 Notches.
– Heavy duty (thick) replacement cutting blade.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

12″ Heavy Duty & TNT Coated

Part #: SDR-012-04TIN

Exclusive Walt Powley Inline heavy-duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.

Features:
– 12″ Long x .875″ High with 4 Notches.
– Heavy-duty (thick) replacement cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

“TNT” Coated Die Rule Cutting Blade – 12″

Part #: SDR-012TIN

For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

Features:
– 12″ Long x .875″ High with 4 Notches.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!

Add to Quote

Die Rule Cutting Blade – 20″

Part #: SDR-020

For Use With: Scheffer / Global Web Finishing rotary cutters

Features:
– 20″ Long x .875″ High with 8 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.

Compare to: Scheffer Part# B20249

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

20″ Heavy Duty & TNT Coated

Part #: SDR-020-04TIN

Exclusive Walt Powley Inline heavy-duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.

Features:
– 20″ Long x .875″ High with 6 Notches.
– Heavy-duty (thick) replacement cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

Die Rule Cutting Blade – 24″

Part #: SDR-024

For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

Features:
– 24″ Long x .875″ High with 8 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

24″ Heavy Duty & TNT Coated

Part #: SDR-024-04TIN

Exclusive Walt Powley Inline heavy-duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.

Features:
– 24″ Long x .875″ High with 8 Notches.
– Heavy-duty (thick) replacement cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase life life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

“TNT” Coated Die Rule Cutting Blade – 24″

Part #: SDR-024TIN

For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

Features:
– 24″ Long x .875″ High with 8 Notches.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!

Add to Quote

Die Rule Cutting Blade – 25″

Part #: SDR-025

For Use With: Scheffer / Global Web Finishing rotary cutters

Features:
– 25″ Long x .875″ High with 12 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.

Compare to: Scheffer Part# B36840

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

Die Rule Cutting Blade – 28″

Part #: SDR-028

For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

Features:
– 28″ Long x .875″ High with 10 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

Die Rule Cutting Blade – 36″

Part #: SDR-036

For Use With: Scheffer / Global Web Finishing rotary cutters

Features:
– 36″ Long x .875″ High x 12 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

Die Rule Cutting Blade – 40″

Part #: SDR-040

For Use With: Scheffer / Global Web Finishing rotary cutters

Features:
– 40″ Long x .875″ High x 16 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.

Compare to: Scheffer Part# B21921

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

“TNT” Coated Die Rule Cutting Blade – 40″

Part #: SDR-040-B-TIN

For Use With: Scheffer / Global Web Finishing rotary cutters

Features:
– 40″ Long x .875″ High with 12 Notches.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!

Add to Quote

Die Rule Cutting Blade – 40″

Part #: SDR-040B

For Use With: Scheffer / Global Web Finishing rotary cutters

Features:
– 40″ Long x .875″ High x 12 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.

Compare to: Scheffer Part# B36841

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

Die Rule Cutting Blade – 20″

Part #: SDR-620-06

For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

Features:
– 20″ Long x .875″ High x 6 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

“TNT” Coated Die Rule Cutting Blade – 20″

Part #: SDRE-020-06

For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

Features:
– 20″ Long x .875″ High with 6 Notches.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!

Add to Quote

Custom Perf Blades

Part #: See Below - Please Specify

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Custom perf blades for “Snap Pack” products that are perforated both head and foot.
– Used to produce perf/cut or perf/cut/perf or perf/cut-cut/perf products.
– 12″ Long x .875″ High with 4 Notches.

8 TPI = .062″ Cut x .062″ Tie x .070″ Depth of Tie – Part #PB-8-062-062-S
8 TPI = .093″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-8-093-031-S
10 TPI = .069″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-10-069-031-S
12 TPI = .052″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-12-052-031-S
16 TPI = .031″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-16-031-031-S

Perf blades can be supplied with any combination of cut, tie and depth dimensions upon request. – Please Call

* Please allow 5 business days to manufacture.

Add to Quote

Nip Wheel – Rubber Covered

Part #: See Part #1-1897 & 1-5246

For Use With: Scheffer / Global Web Finishing , I-Web and Spec equipment.

Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.102″ ID x .750″ Wide
– .475″ bearing ID
– High-quality, double sealed, 6001RS low friction bearing. – Qty 2
– Covered with clear rubber urethane material.

Add to Quote

Long / Thin Stripper Finger

Part #: SF-LT-02

For Use With: WPM, Scheffer, and Vits rotary cutters.

Features:
– Standard replacement phenolic stripper finger.
– Long / Thin angled stripper finger.
– Used for lighter weight paper stocks and overall thinner chips.

Add to Quote

Short / Thick Mini Stripper Finger

Part #: SF-SPC

For Use With: WPM and Scheffer closed end mailer systems.

Features:
– Standard replacement phenolic stripper finger.
– Short / Thick angled stripper finger.
– Short /Mini body.
– Used for heavier weight paper stocks and overall thicker chips.

Add to Quote

Short / Thick Stripper Finger

Part #: SF-ST-01

For Use With: WPM, Scheffer, and Vits rotary cutters.

Features:
– Standard replacement phenolic stripper finger.
– Short / Thick angled stripper finger.
– Used for heavier weight paper stocks and overall thicker chips.

Add to Quote

20″ Knife Holder Front Plate – Modified

Part #: SFP-625-10M

For Use With: Scheffer rotary cutters with 5/8″ knife cylinder undercut.

Features:
– Modified 20″ replacement knife holder front plate.
– Precision machined from one piece solid tool steel – very durable.
– Exceeds OEM specifications.

Add to Quote

12″ Extra Heavy Duty Cutting Blade

Part #: SGR-012-06

Exclusive Walt Powley Inline extra heavy-duty replacement cutting blade for use with Scheffer / Global Web Finishing rotary cutters.

Features:
– 12″ Long x .875″ High with 4 Notches.
– Extra heavy-duty (6 point) replacement cutting blade.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.

Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications and include a specialized cutting edge to maximize knife life and provide superior cut quality.

Add to Quote

Screw Housing Assembly – .866″ Bore

Part #: SH-159

For Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement threaded screw housing assembly for use with .866″ ID slitter, perf, and score wheels.
– Includes screw housing, axle, washer, two bearings, and two snap rings.

Add to Quote

Screw Housing Assembly – .748″ Bore

Part #: SH-912-113

For Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement threaded screw housing assembly for use with .748″ ID slitter, perf, and score wheels.
– Includes screw housing, axle, washer, two bearings, and two snap rings.

Add to Quote

Infeed Guide

Part #: SIG-90

For Use With: Scheffer rotary cutter infeed draw rollers.

Features:
– Standard replacement infeed guide.
– Manufactured from durable white delrin.
– Sold separately.

Compare to: Scheffer Part # B20-2890 / P230094

Add to Quote

12″ Traditional Style Scheffer / Global Web Finishing Knife Holder Assembly – 17.750″/35.500″ & 17.795″/35.590″ Circ.

Part #: SKA-12-35

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 17.750″/35.500″ & 17.795″/35.590″ Circumference.
– Standard replacement 12″ traditional style knife holder assembly.
– Includes all knife holder mounting hardware (cap screws, washers and brass dovetail nuts) and choice of either a lead or trail edge t-Bar/front Plate.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Add to Quote

12″ Traditional Style Scheffer / Global Web Finishing Knife Holder Assembly – 22.750″/45.500″ – 24.803″/49.606″ Circ.

Part #: SKA-12-45

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– Standard replacement 12″ traditional style knife holder assembly.
– Includes all knife holder mounting hardware (cap screws, washers and brass dovetail nuts) and choice of either a lead or trail edge t-Bar/front Plate.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.

Add to Quote

Kicker Wheel Brush – 38″ Wide Delivery Tables

Part #: SKB-001Y

For Use With: Scheffer / Global Web Finishing rotary cutters with T.E.D. delivery tables.

Features:
– Standard replacement kicker wheel brush.
– White delrin core with durable yellow nylon crimped bristles.
– 2.00″ Wide x 1.00″ Tall x .375″ Thick
– 1.50″ approximate bristle length.

SKB-001Y kicker brush is for use with full-web (16 page) 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″ & 23.00″/46.00″ circumference Scheffer rotary cutter delivery tables.

Compare to: Scheffer Part# B22542

Add to Quote

Kicker Wheel Brushes – Rebristle Service

Part #: SKB-002R

For Use With: Scheffer / Global Web Finishing rotary cutters with T.E.D. delivery tables.

Features:
– Allows reuse of kicker wheel brushes.
– New yellow nylon bristles.

Ship your existing worn kicker wheel brushes to us and our rebristle service will remove and replace all old brush bristles with new yellow nylon bristles.

Add to Quote

Kicker Wheel Brush – 38″ Wide Delivery Tables

Part #: SKB-002Y

For Use With: Scheffer / Global Web Finishing rotary cutters with T.E.D. delivery tables.

Features:
– Standard replacement kicker wheel brush.
– White delrin core with durable yellow nylon crimped bristles.
– 2.375″ Wide x 1.00″ Tall x .375″ Thick
– 1.375″ approximate bristle length.

SKB-002Y kicker brush is for use with full-web (16 page) 24.803″/49.606″ circumference Scheffer rotary cutter delivery tables.

Compare to: Scheffer Part# B22687

Add to Quote

Kicker Wheel Brush – 26″ Wide Delivery Tables

Part #: SKB-003Y

For Use With: Scheffer / Global Web Finishing rotary cutters with T.E.D. delivery tables.

Features:
– Standard replacement kicker wheel brush.
– White delrin core with durable yellow nylon crimped bristles.
– 1.50″ Wide x 1.00″ Tall x .375″ Thick
– 1.25″ approximate bristle length.

SKB-003Y kicker brush is for use with half-web (8 page) 17.750″/35.500″& 17.795″/35.590″ circumference Scheffer rotary cutter delivery tables.

Compare to: Scheffer Part# B23174

Add to Quote

Kicker Brush Mounting Screw

Part #: SKB-500S

For Use With: Scheffer / Global Web Finishing rotary cutters with T.E.D. delivery tables.

Features:
– Standard replacement kicker brush mounting screw.
– Used to mount kicker brushes to kicker wheel assembly.

Add to Quote

Heavy Duty 12″ T-Bar/Front Plate

Part #: SKFP-12T

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Heavy Duty 12″ replacement T-Bar/Front Plate for use with traditional style knife holders.
– .150″ overall thickness.
– Best used when running chip sizes 3/8″ and larger.
– Precision machined from steel this is the most durable T-Bar/Front Plate available!
– Excellent general purpose T-Bar/Front Plate – can be used lead or trail edge.

Add to Quote

Thin 12″ T-Bar/Front Plate

Part #: SKFP-12TN

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Thin 12″ replacement T-Bar/Front Plate for use with traditional style knife holders.
– .062″ overall thickness.
– Best used when running chip sizes 3/8″ and smaller.
– Precision machined from steel to be durable.
– Excellent general purpose T-Bar/Front Plate – can be used lead or trail edge.

Add to Quote

Stripper Pin Removal Tool

Part #: SP-02R

For Use With: Scheffer / Global Web Finishing and Vits rotary cutters.

Features:
– Standard stripper pin removal tool.
– Used to push/remove worn stripper pins from rotary cutter anvil cylinder.

Compare to: Scheffer Part# C16514

Add to Quote

Stripper Pin Insertion Tool

Part #: SP-IT02

For Use With: Scheffer / Global Web Finishing, WPM / AGM, and Vits rotary cutters.

Features:
– Standard stripper pin insertion tool.
– Used to insert stripper pins into rotary cutter anvil cylinder.

Compare to: Scheffer Part# A17390

Add to Quote

Snap Ring/Nip Wheel Axle

Part #: SR-1056

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement snap ring for nip wheel axle.
– Two snap rings needed per assembly.

Add to Quote

Retaining Washer For T-Bars/Front Plates

Part #: SS-10-24-625

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement stainless steel retaining washer for traditional style knife holder T-Bars/Front Plates.
– Retaining washer is positioned between the split washer and knife holder body when mounting T-Bar/Front Plates to the traditional style knife holder.

Add to Quote

Tapered Stripper Pin

Part #: SSP-001T

For Use With: Scheffer / Global Web Finishing and Vits rotary cutters.

Features:
– Standard replacement tapered chip removal stripper pin.

Add to Quote

Straight Stripper Pin

Part #: SSP-002S

For Use With: Scheffer / Global Web Finishing and Vits rotary cutters.

Features:
– Standard replacement straight chip removal stripper pin.

Add to Quote

Large Diameter Straight Stripper Pin

Part #: SSP-155S

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Large diameter straight chip removal stripper pin.
– Larger plastic insert body diameter.
– Best used if standard diameter stripper pins are pushing into the anvil cylinder because of heavier paper stocks or thicker chips.
– Used when anvil cylinder pin holes are worn or over sized.

Compare to: Scheffer Part # A32985

Add to Quote

Large Diameter Tapered Stripper Pin

Part #: SSP-155T

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Large diameter tapered chip removal stripper pin.
– Larger plastic insert body diameter.
– Best used if standard diameter stripper pins are pushing into the anvil cylinder because of heavier paper stocks or thicker chips.
– Used when anvil cylinder pin holes are worn or over sized.

Compare to: Scheffer Part # A32984

Add to Quote

Skate (Quad) Ring

Part #: SSR-004

For Use With: Scheffer rotary cutters with skate delivery tables.

Features:
– Standard replacement skate (quad) ring.
– Manufactured from a durable non-marking polyurethane.

Compare to: Scheffer Part# Q4326-C2507Y

Add to Quote

Skate Wheel

Part #: SSW-1010 or A18039

For Use With: Scheffer rotary cutters with skate delivery tables.

Features:
– Standard replacement skate wheel for single wheel skate assembly.

Compare to: Scheffer Part# A18039

Add to Quote

Slitter Wheel – Cameron – 3.03″ OD x .748″ ID

Part #: SW-01-303-748

For Use With: Scheffer, Global Web Finishing and I-Web equipment.

Features:
– Standard Cameron style replacement slitter wheel.
– 3.03″ OD x .748″ ID x .244″ Thick

Our slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.

We stock a huge inventory of pressroom slitter wheels for any application. – Please call!

Add to Quote

Slitter Wheel – Cameron – 3.03″ OD x .866″ ID

Part #: SW-01-303-866

For Use With: Scheffer, Global Web Finishing and I-Web equipment.

Features:
– Standard Cameron style replacement slitter wheel.
– 3.03″ OD x .866″ ID x .244″ Thick

Our slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.

We stock a huge inventory of pressroom slitter wheels for any application. – Please call!

Add to Quote

Nip Wheel – White Delrin – 3.00″ OD

Part #: TW-300W-03

For Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.

Features:
– Standard replacement air trolley wheel.
– 3.00″ OD x 1.125″ ID x .875″ Wide
– .500″ bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, R8RS low friction bearings. – Qty 2
– Meets or exceeds OEM specifications.

Add to Quote

Nip Wheel – White Delrin – 3.00″ OD

Part #: TW-300W-04

For Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.

Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.375″ ID x 1.00″ Wide
– .625″ bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, 1623RS low friction bearings -Qty 2
– Meets or exceeds OEM specifications.

Add to Quote

Nip Wheel – White Delrin – 3.00″ OD

Part #: TW-300W-07

For Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.

Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.102″ ID x .9375″ Wide
– .475″ bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, 6001RS low friction bearings -Qty 2
– Meets or exceeds OEM specifications.

Add to Quote

Nip Wheel – White Delrin – 3.04″ OD

Part #: TW-304W-01

For use with Scheffer, Global Web Finishing and I-Web equipment.

Features:
– Replacement air trolley wheel.
– 3.04″ OD x 1.374″ ID x 1.117″ wide
– Manufactured from delrin.
– Meets or exceeds OEM standards.

Add to Quote

Nip Wheel – White Delrin – 3.00″ OD

Part #: TW-3125W-04

For Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.

Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.60″ ID x 1.00″ Wide
– .866″ Bore – No Bearings
– Manufactured from delrin.
– Meets or exceeds OEM specifications.

Add to Quote

Nip Wheel – White Delrin – 3.00″ OD

Part #: TW-3125W-04-750

For Use With: Scheffer, Global Web Finishing and I-Web equipment.

Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.60″ ID x 1.00″ Wide
– .748″ Bore – No Bearings
– Manufactured from delrin.
– Meets or exceeds OEM specifications.

Add to Quote

Nip Wheel – Rubber Covered

Part #: TW-3150G-01-748

For Use With: Scheffer, Global Web Finishing, and I-Web equipment.

Features:
– Replacement air trolley wheel.
– 3.150″ OD x 1.70″ ID x .675″ Wide
– .748″ Bore – No Bearings
– Covered with green, non-marking, rubber urethane material.
– Meets or exceeds OEM specifications.

Add to Quote

Nip Wheel – Rubber Covered

Part #: TW-3150G-01-866

For Use With: Scheffer, Global Web Finishing, and I-Web equipment.

Features:
– Replacement air trolley wheel.
– 3.150″ OD x 1.70″ ID x .675″ Wide
– .866″ Bore – No Bearings
– Covered with green, non-marking, rubber urethane material.
– Meets or exceeds OEM specifications.

Add to Quote

Sleeve Valve

Part #: V-3W125

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement sleeve valve.

Add to Quote

Split Washer For T-Bars/Front Plates

Part #: W-10-24-625

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement split washer for traditional style knife holder T-Bars/Front Plates.
– Split washer is positioned below the cap screw and above the retaining washer when mounting T-Bar/Front Plates to the traditional style knife holder body.

Add to Quote

Retaining Washer

Part #: W-18-8-250

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement stainless steel retaining washer for traditional style knife holders.
– Retaining washer is positioned between the split washer and knife holder body.

Add to Quote

Split Washer

Part #: W-260-0487

For Use With: Scheffer / Global Web Finishing rotary cutters.

Features:
– Standard replacement split washer for traditional style knife holders.
– Split washer is positioned below the mounting cap screw and above the retaining washer within the knife holder body.

Add to Quote

Washer/Nip Wheel Axle

Part #: W-530

For Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

Features:
– Replacement washer for nip wheel axle.
– Two washers needed per assembly.

Add to Quote