Skip to content

sales@euroweb.ltd.uk

+44 (0) 1494 450445

Request a Quote

Vits

Home   ›   Parts Shop   ›   Vits

  • Bearing - 1.125" OD X .375" ID

    Bearing – 1.125″ OD X .375″ ID

    Part #: 1614-ZZ

    For Use With: TW-250-V Nip Wheel.

    Features:
    – Replacement bearing.
    – 1.125″ OD x .375″ ID x .375″ Wide
    – High-quality, double sealed, 1614Z low friction bearing.
    – Two used per nip wheel.

    Add to Quote
  • Bearing - 1.250" OD x .475" ID

    Bearing – 1.250″ OD x .475″ ID

    Part #: 6201-2RS

    For Use With: TW-250-1-W, TW-250-4-P, and TW-250-2-RU Nip Wheels.

    Features:
    – Replacement bearing.
    – 1.250″ OD x .475″ ID x .400″ Wide
    – High-quality, double sealed, 6201-2RS low friction bearing.
    – Two used per nip wheel.

    Add to Quote
  • Internal Bearing

    Internal Bearing

    Part #: BB-50036

    For Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.

    Features:
    – Double rubber sealed low friction bearing that meets or exceeds OEM specifications.

    Add to Quote
  • Bearing - 1.125" OD X .500" ID

    Bearing – 1.125″ OD X .500″ ID

    Part #: BR8-002 or R8RS

    For Use With:
    – WPM, AGM, Baldwin, ILF, Versa Tech and Vits 2.50″ OD Slit/Perf/Score Wheels.
    – TW-250R-01, TW-250Y-03, & TW-250W-02 Nip Wheels.
    – TW-300W-03 Nip Wheel.
    – TW-500 Infeed Wheel.

    Features:
    – Replacement bearing.
    – 1.250″ OD x .500″ ID x .300″ Wide.
    – High-quality, double sealed, R8RS low friction bearing.
    – One used per wheel.

    Add to Quote
  • Bearing Spacer

    Bearing Spacer

    Part #: BS-50036

    For Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.

    Features:
    – Positioned between the rotary plow puck and internal mounting bracket.

    Add to Quote
  • Snap Rings

    Snap Rings

    Part #: DW-250R-06

    For Use With:

    • Vits and WPM/AGM air trolley slitter conversion kits on angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
    • WPM/AGM Air trolley (double wheel) assemblies.

    Features:
    – Replacement snap ring for use with modified axle.
    – Two snap rings needed per slitter conversion assembly.
    – Four rings needed per double nip wheel assembly.

    Add to Quote
  • Internal Plow Puck Mounting Bracket

    Internal Plow Puck Mounting Bracket

    Part #: H-50036

    For Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.

    Features:
    – Replacement internal housing bracket to mount rotary plow puck.

    Add to Quote
  • Barrel Insert

    Barrel Insert

    Part #: KCO-1001-B

    For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

    Features:
    – Standard replacement barrel insert for use with Vits and KCO style Scheffer / Global Web Finishing knife holders.

    Add to Quote
  • Tab Plunger

    Tab Plunger

    Part #: KCO-1002-P

    For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

    Features:
    – Standard replacement tab plunger for use with Vits and KCO style Scheffer / Global Web Finishing knife holders.

    Add to Quote
  • Set Screw

    Set Screw

    Part #: KCO-1004-S

    For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

    Features:
    – Standard replacement set screw for use with Vits and KCO style Scheffer / Global Web Finishing knife holders.

    Add to Quote
  • Spring

    Spring

    Part #: KCO-1006-SP

    For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

    Features:
    – Standard replacement spring for use with Vits and KCO style Scheffer / Global Web Finishing knife holders.

    Add to Quote
  • 12" Vits Knife Holder Assembly - 6 Mounting Holes

    12″ Vits Knife Holder Assembly – 6 Mounting Holes

    Part #: KCO-12-250-06

    For Use With: Vits rotary cutters.

    Features:
    – 25.984″ (660mm) Circumference.
    –  Replacement 12″ knife holder assembly with six mounting holes.
    – Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
    – Utilizes standard replacement 12″ (4 notch) cutting blade.
    – Precision machined to meet or exceed OEM specifications.

    Add to Quote
  • 12" Vits Knife Holder Assembly - 25.984" Circ.

    12″ Vits Knife Holder Assembly – 25.984″ Circ.

    Part #: KCO-12-25000

    For Use With: Vits rotary cutters.

    Features:
    – 25.984″ (660mm) Circumference.
    – Standard replacement 12″ knife holder assembly.
    – Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
    – Utilizes standard replacement 12″ (4 notch) cutting blade.
    – Precision machined to meet or exceed OEM specifications.

    Add to Quote
  • 12" - Double (Chip) Knife Holder Assembly

    12″ – Double (Chip) Knife Holder Assembly

    Part #: KCO-12-DCS-25V

    For Use With: Vits Rotary Cutters

    Features:
    – 25.984″ (660mm) Circumference.
    – Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
    – Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
    – Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), and chip spacers (.125″ and .375″ or .250″ with notched front plate).
    – 0.500″ chip set-up utilizes three standard replacement 12″ (4 notch) cutting blades or two heavy duty 12″ 4-point cutting blades.
    – 0.250″ chip set-up utilizes two standard replacement 12″ (4 notch) cutting blades and notched front plate.

    *Please specify chip size when ordering.

    Add to Quote
  • 20" Vits Knife Holder Assembly - 25.984" Circ.

    20″ Vits Knife Holder Assembly – 25.984″ Circ.

    Part #: KCO-20-25V

    For Use With: Vits rotary cutters.

    Features:
    – 25.984″ (660mm) Circumference.
    – Standard replacement 20″ knife holder assembly.
    – Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
    – Utilizes standard replacement 20″ (6 notch) cutting blade.
    – Precision machined to meet or exceed OEM specifications.

    Add to Quote
  • 20" - Double (Chip) Knife Holder Assembly

    20″ – Double (Chip) Knife Holder Assembly

    Part #: KCO-20-DCS-25V

    For Use With: Vits Rotary Cutters

    Features:
    – 25.984″ (660mm) Circumference.
    – Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
    – Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
    – Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), and chip spacers (.125″ and .375″ or .250″ with notched front plate).
    – 0.500″ chip set-up utilizes three standard replacement 20″ (6 notch) cutting blades or two heavy duty 20″ 4-point cutting blades.
    – 0.250″ chip set-up utilizes two standard replacement 20″ (6 notch) cutting blades and notched front plate.

    *Please specify chip size when ordering.

    Add to Quote
  • 24" Vits Knife Holder Assembly - 25.984" Circ.

    24″ Vits Knife Holder Assembly – 25.984″ Circ.

    Part #: KCO-24-25V

    For Use With: Vits rotary cutters.

    Features:
    – 25.984″ (660mm) Circumference.
    – Standard replacement 24″ knife holder assembly.
    – Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
    – Utilizes standard replacement 24″ (8 notch) cutting blade.
    – Precision machined to meet or exceed OEM specifications.

    Add to Quote
  • Placeholder

    24″ – Double (Chip) Knife Holder Assembly

    Part #: KCO-24-DCS-25V

    For Use With: Vits Rotary Cutters

    Features:
    – 25.984″ (660mm) Circumference.
    – Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
    – Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
    – Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), and chip spacers (.125″ and .375″ or .250″ with notched front plate).
    – 0.500″ chip set-up utilizes three standard replacement 24″ (8 notch) cutting blades or two heavy duty 24″ 4-point cutting blades.
    – 0.250″ chip set-up utilizes two standard replacement 24″ (8 notch) cutting blades and notched front plate.

    *Please specify chip size when ordering.

    Add to Quote
  • Modified Swing Hinge Connector

    Modified Swing Hinge Connector

    Part #: KCO-250-E

    For Use With: KCO Style Double (Chip) Knife Holder Assembly

    Features:
    – Modified swing hinge connector allows for 1/4″ – 3/8″ chip spacer and front plate lockup.

    Add to Quote
  • 28" Vits Knife Holder Assembly - 25.984" Circ.

    28″ Vits Knife Holder Assembly – 25.984″ Circ.

    Part #: KCO-28-25V

    For Use With: Vits rotary cutters.

    Features:
    – 25.984″ (660mm) Circumference.
    – 28″ KCO style knife holder assembly.
    – Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
    – Utilizes standard replacement 28″ (10 notch) cutting blade.
    – Precision machined to meet or exceed OEM specifications.

    Add to Quote
  • 28" Vits Knife Holder Assembly - 1.5" Wide Modified

    28″ Vits Knife Holder Assembly – 1.5″ Wide Modified

    Part #: KCO-28-25V-150MOD

    For Use With: Vits rotary cutters.

    Features:
    – 25.984″ (660mm) Circumference.
    – Modified replacement 28″ X 1.5″ wide knife holder assembly.
    – Allows for slotted moved around the knife cylinder without dismounting the knife holder.
    – Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
    – Utilizes standard replacement 28″ (10 notch) cutting blade.
    – Precision machined to meet or exceed OEM specifications.

    Add to Quote
  • Placeholder

    28″ – Double (Chip) Knife Holder Assembly

    Part #: KCO-28-DCS-25V

    For Use With: Vits Rotary Cutters

    Features:
    – 25.984″ (660mm) Circumference.
    – Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
    – Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
    – Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), and chip spacers (.125″ and .375″ or .250″ with notched front plate).
    – 0.500″ chip set-up utilizes three standard replacement 28″ (10 notch) cutting blades or two heavy duty 28″ 4-point cutting blades.
    – 0.250″ chip set-up utilizes two standard replacement 28″ (10 notch) cutting blades and notched front plate.

    *Please specify chip size when ordering.

    Add to Quote
  • Modified Swing Hinge Connector

    Modified Swing Hinge Connector

    Part #: KCO-500-E

    For Use With: KCO Style Double (Chip) Knife Holder Assembly

    Features:
    – Modified swing hinge connector allows for 1/2″ chip spacer and front plate lockup.

    Add to Quote
  • Split Washer

    Split Washer

    Part #: KCO-SW250

    For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

    Features:
    – Standard replacement split washer for Vits and KCO style Scheffer / Global Web Finishing knife holders.
    – Split washer is positioned below the mounting cap screw and above the retaining washer within the knife holder body.

    Add to Quote
  • Retaining Washer

    Retaining Washer

    Part #: KCO-W375

    For Use With: Vits and Scheffer / Global Web Finishing rotary cutters.

    Features:
    – Standard replacement stainless steel retaining washer for Vits and KCO style Scheffer / Global Web Finishing knife holders.
    – Retaining washer is positioned between the split washer and knife holder body.

    Add to Quote
  • 0.125" Chip Spacer

    0.125″ Chip Spacer

    Part #: KCO-XX-25V-125CS

    For Use With: Vits Double (Chip) Knife Holder Assembly

    Features:
    – Precision machined to accommodate for .125″ chip.
    – Can be manufactured in lengths of 12″, 20″, 24″ or 28″.

    * Please specify length when ordering.

    Add to Quote
  • 0.250" Chip Spacer

    0.250″ Chip Spacer

    Part #: KCO-XX-25V-250CS

    For Use With: Vits Double (Chip) Knife Holder Assembly

    Features:
    – Precision machined to accommodate for .250″ chip.
    – Utilized with notched front plate (part #PL-250-XX)
    – Can be manufactured in lengths of 12″, 20″, 24″ or 28″

    * Please specify length when ordering.

    Add to Quote
  • 0.375" Chip Spacer

    0.375″ Chip Spacer

    Part #: KCO-XX-25V-375CS

    For Use With: Vits Double (Chip) Knife Holder Assembly

    Features:
    – Precision machined to accommodate for .375″ chip.
    – Can be manufactured in lengths of 12″, 20″, 24″ or 28″

    * Please specify length when ordering.

    Add to Quote
  • S-Connector

    S-Connector

    Part #: L-4187-01

    For Use With: Vits and WPM/AGM plow folding equipment – 4.187″ diameter.

    Features:
    – Connects plow linkage rod to actuating shaft.
    – Precision machined to meet or exceed OEM specifications.

    Add to Quote
  • Plow Stem Mounting Axle

    Plow Stem Mounting Axle

    Part #: M-4187-1875

    For Use With: Vits and WPM/AGM plow folding equipment – 4.187″ diameter.

    Features:
    – Connects s-connector to plow linkage rod.
    – Mounts two 1.875″ wide support rollers.
    – Allows for side mounting of support shafts/roller axles to add on additional support roller segments or rotary plows.
    – Precision machined to meet or exceed OEM specifications.

    Add to Quote
  • Shoulder Mounting Bolt

    Shoulder Mounting Bolt

    Part #: MB-50036

    For Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.

    Features:
    – Used to mount plow puck to rotary plow assembly.

    Add to Quote
  • Micro/Mini Perf Wheels - 2.50" OD

    Micro/Mini Perf Wheels – 2.50″ OD

    Part #: Multiple

    For Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits:

    Features:
    – Standard replacement micro/mini perforation wheel.
    – 2.50″ OD x 1.25″ ID x .250″ Thick
    – 30, 45, 50, 66, 72 Teeth (Cuts) Per Inch available.
    – Tie as small as .005″

    Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.

    Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!

    Add to Quote
  • Internal Bearing Post

    Internal Bearing Post

    Part #: P-50036

    For Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.

    Features:
    – Replacement internal bearing post.

    Add to Quote
  • Front Plate

    Front Plate

    Part #: PL-250-XX

    For Use With: Vits Double (Chip) Knife Holder Assembly

    Features:
    – Standard replacement front plate.
    – Utilized with .250″ chip spacer set-up.
    – Can be manufactured in lengths of 12″, 20″, 24″, or 28″.

    * Please specify length when ordering.

    Add to Quote
  • Plow Shoes

    Plow Shoes

    Part #: PS-01

    For Use With: Vits, WPM, AGM, Baldwin, ILF, Versa Tech, and Gregg, plow folding equipment:

    Features:
    – Best used when plow folding light weight or single thickness paper.
    – Precision machined and assembled from steel to meet or exceed OEM specifications.
    – Custom manufactured center post, left or right handed to customer specified widths and lengths.
    – Fits 1.25″ diameter mounting shafts.

    Custom plow shoe widths and lengths can be manufactured upon request. Please click here for plow shoe order form link.

    Add to Quote
  • Perf Wheel - 2.50" OD x 10 TPI

    Perf Wheel – 2.50″ OD x 10 TPI

    Part #: PW-10-250

    For Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:

    Features:
    – Standard replacement perforation wheel.
    – 2.50″ OD x 1.125″ ID x .250″ Thick
    – 10 TPI or teeth (cuts) per inch
    – Size of cut = .069″
    – Size of tie = .031″
    – Teeth per wheel = 78

    Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.

    Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!

    CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!

    Add to Quote
  • Perf Wheel - 2.50" OD x 12 TPI

    Perf Wheel – 2.50″ OD x 12 TPI

    Part #: PW-12-250

    For Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:

    Features:
    – Standard replacement perforation wheel.
    – 2.50″ OD x 1.125″ ID x .250″ Thick
    – 12 TPI or teeth (cuts) per inch
    – Size of cut = .052″
    – Size of tie = .031″
    – Teeth per wheel = 95

    Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.

    Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!

    CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!

    Add to Quote
  • Perf Wheel - 2.50" OD x 16 TPI

    Perf Wheel – 2.50″ OD x 16 TPI

    Part #: PW-16-250

    For Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:

    Features:
    – Standard replacement perforation wheel.
    – 2.50″ OD x 1.125″ ID x .250″ Thick
    – 16 TPI or teeth (cuts) per inch
    – Size of cut = .031″
    – Size of tie = .031″
    – Teeth per wheel = 125

    Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.

    Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!

    CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!

    Add to Quote
  • Perf Wheel - 2.50" OD x 8 TPI

    Perf Wheel – 2.50″ OD x 8 TPI

    Part #: PW-8-250

    For Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:

    Features:
    – Standard replacement perforation wheel.
    – 2.50″ OD x 1.125″ ID x .250″ Thick
    – 8 TPI or teeth (cuts) per inch
    – Size of cut = .062″
    – Size of tie = .062″
    – Teeth per wheel = 63

    Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.

    Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!

    CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!

    Add to Quote
  • Plow Linkage Rod

    Plow Linkage Rod

    Part #: R-4187-02

    For Use With: Vits and WPM/AGM plow folding equipment – 4.187″ diameter.

    Features:
    – 14″ long.
    – Fits inside plow stem to connect turn knob to S-connector actuating arm.
    – Precision machined to meet or exceed OEM specifications.

    Add to Quote
  • Rotary Plow Assembly

    Rotary Plow Assembly

    Part #: RP-01

    For Use With: Vits and WPM / AGM plow folding equipment – 4.187″ diameter.

    Features:
    – 4.187″ support roller OD.
    – 3.50″ OD double beveled rotary plow puck designed to greatly reduce gusseting, cracking, wrinkling and marking on most paper stocks.
    – Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.

    Add to Quote
  • 4.25" Diameter Plow Puck

    4.25″ Diameter Plow Puck

    Part #: RP-02A

    For Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.

    Features:
    – Large diameter replacement plow puck.
    – 4.25″ OD
    – Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.
    – Single beveled which greatly reduces gusseting, cracking, wrinkling and marking on heavier paper stocks.

    Add to Quote
  • 3.50" Diameter Plow Puck

    3.50″ Diameter Plow Puck

    Part #: RP-02B

    For Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.

    Features:
    -Standard replacement plow puck.
    – 3.50″ OD
    – Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.
    – Double beveled which greatly reduces gusseting, cracking, wrinkling and marking on most paper stocks.

    Add to Quote
  • Recoil Tubing - 1/8"

    Recoil Tubing – 1/8″

    Part #: RT-125

    For Use With: Vits and WPM/AGM Air Trolley Assemblies.

    Features:
    – Replacement flexible recoil air tubing used for connecting air manifold bar to individual air trolley and slitter assemblies.
    – Manufactured from durable polyurethane to meet or exceed OEM specifications.

    Add to Quote
  • Slitter Wheel - "Full Grind" - 2.50" OD w/Bearing

    Slitter Wheel – “Full Grind” – 2.50″ OD w/Bearing

    Part #: S-007

    For Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.

    Features:
    – Standard replacement slitter wheel.
    – 2.50″ OD x 1.125″ ID x .250″ Thick
    – Full Grind – No Step
    – .500″ bearing ID
    – Supplied with a high-quality, double sealed, R8RS low friction bearing installed.

    Our slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.

    We stock a large inventory of pressroom slitter wheels for any application. – Please call!

    Add to Quote
  • Slitter Wheel - "Full Grind" - 2.50" OD

    Slitter Wheel – “Full Grind” – 2.50″ OD

    Part #: S-007-01

    For Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.

    Features:
    – Standard replacement slitter wheel.
    – 2.50″ OD x 1.125″ ID x .250″ Thick
    – Full Grind – No Step

    Our slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.

    We stock a large inventory of pressroom slitter wheels for any application. – Please call!

    Add to Quote
  • Support Shaft - Roller Axle

    Support Shaft – Roller Axle

    Part #: S-4187-200

    For Use With: Vits and WPM/AGM plow folding equipment – 4.187″ diameter.

    Features:
    – 2 7/8″ long plow shaft extension.
    – 1.25″ OD shaft diameter.
    – 3/8″-16 Thread

    * Other plow shaft extension lengths available – Please call.

    Add to Quote
  • Support Shaft - Roller Axle

    Support Shaft – Roller Axle

    Part #: S-4187-500

    For Use With: Vits and WPM/AGM plow folding equipment – 4.187″ diameter.

    Features:
    – 5″ long plow shaft extension.
    – 1.25″ OD shaft diameter.
    – 3/8″-16 Thread

    * Other plow shaft extension lengths available – Please call.

    Add to Quote
  • Air Slitter/Perf/Score Wheel Holder Assembly

    Air Slitter/Perf/Score Wheel Holder Assembly

    Part #: SA-250-01

    For Use With: Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Standard air slitter/perf/score wheel holder assembly.
    – Complete assembly includes: air cylinder, male elbow, male hex nipple, sleeve valve, and mounting hardware.
    – Manufactured to meet or exceed OEM specifications.
    – Guard not included.

    Add to Quote
  • Arbor Housing

    Arbor Housing

    Part #: SA-250-01-02H

    For Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement arbor housing.

    Add to Quote
  • Mounting Body

    Mounting Body

    Part #: SA-250-01-03B

    For Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement mounting body.

    Add to Quote
  • Mounting Screw

    Mounting Screw

    Part #: SA-250-01-04S

    For Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement mounting screw for threaded arbor.

    Add to Quote
  • Arbor

    Arbor

    Part #: SA-250-01-05A

    For Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement threaded mounting arbor.

    Add to Quote
  • Guide Pin

    Guide Pin

    Part #: SA-250-01-06P

    For Use With:

    • Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
    • WPM/AGM air trolley (double wheel) assemblies.

    Features:
    – Replacement harden guide pin.

    Add to Quote
  • Rectangular Mounting Block

    Rectangular Mounting Block

    Part #: SA-250-01-07R

    For Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement mounting block.

    Add to Quote
  • Wing Nut

    Wing Nut

    Part #: SA-250-01-08W

    For Use With: Vits and WPM/AGM Air Trolley Assemblies.

    Features:
    – Replacement wing nut.

    Add to Quote
  • Flat Washer

    Flat Washer

    Part #: SA-250-01-09C

    For Use With: Vits and WPM/AGM Air Trolley Assemblies.

    Features:
    – Replacement flat washer for mounting block.

    Add to Quote
  • Hex Nut

    Hex Nut

    Part #: SA-250-01-10N

    For Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement hex nut.

    Add to Quote
  • Socket Head Cap Screw

    Socket Head Cap Screw

    Part #: SA-250-01-11S

    For Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement socket head cap screw.
    – Used with arbor housing.

    Add to Quote
  • Set Screw

    Set Screw

    Part #: SA-250-01-12H

    For Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM  and air trolley (double wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement set screw.
    – One used in arbor housing for air slitter/perf/score wheel holder assembly.
    – Two used in mounting body for air trolley (double wheel) assembly.

     

    Add to Quote
  • Guard

    Guard

    Part #: SA-250-10G

    For Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement guard.

    Add to Quote
  • Score Wheel - 2.50" OD

    Score Wheel – 2.50″ OD

    Part #: SC-250-031

    For Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.

    Features:
    – Standard replacement score wheel.
    – 2.50″ OD x 1.125″ ID x .250″ Thick
    – Score radius = .041″
    – Used to reduce gusseting, cracking, wrinkling and marking when plow folding on heavier paper stocks.
    – Manufactured to exacting tolerances from premium quality 52100 steel.

    Add to Quote
  • Die Rule Cutting Blade - 12"

    Die Rule Cutting Blade – 12″

    Part #: SDR-012

    For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

    Features:
    – 12″ Long x .875″ High with 4 Notches.
    – Standard replacement die rule cutting blade.
    – Manufactured to exceed OEM specifications.

    Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

    Add to Quote
  • 12" - Heavy Duty Cutting Blade

    12″ – Heavy Duty Cutting Blade

    Part #: SDR-012-04

    Walt Powley Inline’s exclusive heavy duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.

    Features:
    – 12″ Long x .875″ High with 4 Notches.
    – Heavy duty (thick) replacement cutting blade.
    – Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.

    Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

    Add to Quote
  • 12" Heavy Duty & TNT Coated

    12″ Heavy Duty & TNT Coated

    Part #: SDR-012-04TIN

    Exclusive Walt Powley Inline heavy-duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.

    Features:
    – 12″ Long x .875″ High with 4 Notches.
    – Heavy-duty (thick) replacement cutting blade.
    – Enhanced “TNT” cutting edge coating will dramatically increase knife life.
    – Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.

    Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

    Add to Quote
  • "TNT" Coated Die Rule Cutting Blade - 12"

    “TNT” Coated Die Rule Cutting Blade – 12″

    Part #: SDR-012TIN

    For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

    Features:
    – 12″ Long x .875″ High with 4 Notches.
    – Premium replacement die rule cutting blade.
    – Enhanced “TNT” cutting edge coating will dramatically increase knife life.
    – Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
    – Manufactured to exceed OEM specifications.

    Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!

    Add to Quote
  • 20" Heavy Duty & TNT Coated

    20″ Heavy Duty & TNT Coated

    Part #: SDR-020-04TIN

    Exclusive Walt Powley Inline heavy-duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.

    Features:
    – 20″ Long x .875″ High with 6 Notches.
    – Heavy-duty (thick) replacement cutting blade.
    – Enhanced “TNT” cutting edge coating will dramatically increase knife life.
    – Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.

    Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

    Add to Quote
  • Die Rule Cutting Blade - 24"

    Die Rule Cutting Blade – 24″

    Part #: SDR-024

    For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

    Features:
    – 24″ Long x .875″ High with 8 Notches.
    – Standard replacement die rule cutting blade.
    – Manufactured to exceed OEM specifications.

    Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

    Add to Quote
  • 24" Heavy Duty & TNT Coated

    24″ Heavy Duty & TNT Coated

    Part #: SDR-024-04TIN

    Exclusive Walt Powley Inline heavy-duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.

    Features:
    – 24″ Long x .875″ High with 8 Notches.
    – Heavy-duty (thick) replacement cutting blade.
    – Enhanced “TNT” cutting edge coating will dramatically increase life life.
    – Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.

    Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

    Add to Quote
  • "TNT" Coated Die Rule Cutting Blade - 24"

    “TNT” Coated Die Rule Cutting Blade – 24″

    Part #: SDR-024TIN

    For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

    Features:
    – 24″ Long x .875″ High with 8 Notches.
    – Premium replacement die rule cutting blade.
    – Enhanced “TNT” cutting edge coating will dramatically increase knife life.
    – Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
    – Manufactured to exceed OEM specifications.

    Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!

    Add to Quote
  • Die Rule Cutting Blade - 28"

    Die Rule Cutting Blade – 28″

    Part #: SDR-028

    For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

    Features:
    – 28″ Long x .875″ High with 10 Notches.
    – Standard replacement die rule cutting blade.
    – Manufactured to exceed OEM specifications.

    Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

    Add to Quote
  • Die Rule Cutting Blade - 20"

    Die Rule Cutting Blade – 20″

    Part #: SDR-620-06

    For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

    Features:
    – 20″ Long x .875″ High x 6 Notches.
    – Standard replacement die rule cutting blade.
    – Manufactured to exceed OEM specifications.

    Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.

    Add to Quote
  • "TNT" Coated Die Rule Cutting Blade - 20"

    “TNT” Coated Die Rule Cutting Blade – 20″

    Part #: SDRE-020-06

    For Use With: Scheffer / Global Web Finishing and Vits rotary cutters

    Features:
    – 20″ Long x .875″ High with 6 Notches.
    – Premium replacement die rule cutting blade.
    – Enhanced “TNT” cutting edge coating will dramatically increase knife life.
    – Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
    – Manufactured to exceed OEM specifications.

    Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!

    Add to Quote
  • Long / Thin Stripper Finger

    Long / Thin Stripper Finger

    Part #: SF-LT-02

    For Use With: WPM, Scheffer, and Vits rotary cutters.

    Features:
    – Standard replacement phenolic stripper finger.
    – Long / Thin angled stripper finger.
    – Used for lighter weight paper stocks and overall thinner chips.

    Add to Quote
  • Short / Thick Stripper Finger

    Short / Thick Stripper Finger

    Part #: SF-ST-01

    For Use With: WPM, Scheffer, and Vits rotary cutters.

    Features:
    – Standard replacement phenolic stripper finger.
    – Short / Thick angled stripper finger.
    – Used for heavier weight paper stocks and overall thicker chips.

    Add to Quote
  • Support Roller - 1.875" Wide

    Support Roller – 1.875″ Wide

    Part #: SR-1

    For Use With: Vits and WPM / AGM plow folding equipment:

    Features:
    – 4.187″ OD x 1.25″ ID x 1.875 Wide
    – Fits 1.25″ diameter mounting shaft.
    – Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.

    Add to Quote
  • Support Roller - 5" Wide

    Support Roller – 5″ Wide

    Part #: SR-5

    For Use With: Vits and WPM / AGM plow folding equipment:

    Features:
    – 4.187″ OD x 1.25″ ID x 5.00″ Wide
    – Fits 1.25″ diameter mounting shaft.
    – Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.

    Add to Quote
  • Tapered Stripper Pin

    Tapered Stripper Pin

    Part #: SSP-001T

    For Use With: Scheffer / Global Web Finishing and Vits rotary cutters.

    Features:
    – Standard replacement tapered chip removal stripper pin.

    Add to Quote
  • Straight Stripper Pin

    Straight Stripper Pin

    Part #: SSP-002S

    For Use With: Scheffer / Global Web Finishing and Vits rotary cutters.

    Features:
    – Standard replacement straight chip removal stripper pin.

    Add to Quote
  • Slitter Wheel - 2.50" OD

    Slitter Wheel – 2.50″ OD

    Part #: SW-01-250

    For Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.

    Features:
    – Standard replacement slitter wheel.
    – 2.50″ OD x 1.125″ ID x .250″ Thick

    Our slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.

    We stock a large inventory of pressroom slitter wheels for any application. – Please call!

    Add to Quote
  • Slitter Wheel - 2.50" OD w/Bearing

    Slitter Wheel – 2.50″ OD w/Bearing

    Part #: SWB-01-250

    For Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.

    Features:
    – Standard replacement slitter wheel.
    – 2.50″ OD x 1.125″ ID x .250″ Thick
    – .500″ bearing ID
    – Supplied with a high-quality, double sealed, R8RS low friction bearing installed.

    Our slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.

    We stock a large inventory of pressroom slitter wheels for any application. – Please call!

    Add to Quote
  • Air Trolley Assembly (Single Wheel)

    Air Trolley Assembly (Single Wheel)

    Part #: TA-250-01S

    For Use With: Vits and WPM/AGM angle bars, seam gluers, prefolders, pattern perforators, and plow towers.

    Features:
    – Standard single wheel air trolley assembly.
    – Complete assembly includes; air cylinder, male elbow swivel, male hex nipple, sleeve valve, rectangular mounting block/hardware and nip wheel.
    – Manufactured to meet or exceed OEM specifications.

    Add to Quote
  • Air Trolley/Slitter Assembly - Conversion Kit

    Air Trolley/Slitter Assembly – Conversion Kit

    Part #: TA-250-02C

    For Use With: Vits and WPM/AGM angle bars, seam gluers, prefolders, pattern perforators, and plow towers.

    Features:
    – Converted single wheel air trolley assembly.
    – Modified OD axle allows for use of a slitter, perforation, or score wheel.
    – Slitter/Perf/Score wheel is fixed in place with two snap rings.

    Part# TA-250-10A-MOD (axle) and DW-250R-06 (snap ring) allow for the conversion from a single nip wheel assembly to a slitter/perf/score wheel assembly.

    Add to Quote
  • Yoke

    Yoke

    Part #: TA-250-02Y

    For Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement yoke.

    Add to Quote
  • Nose Mount

    Nose Mount

    Part #: TA-250-03M

    For Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement nose mount.

    Add to Quote
  • Clamp Bar

    Clamp Bar

    Part #: TA-250-04B

    For Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement clamp bar.

    Add to Quote
  • Sleeve Valve

    Sleeve Valve

    Part #: TA-250-06V

    For Use With: Air trolley assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement sleeve valve.

    Add to Quote
  • Hex Nipple

    Hex Nipple

    Part #: TA-250-07N

    For Use With: Air trolley assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement hex nipple.

    Add to Quote
  • Male Elbow Swivel

    Male Elbow Swivel

    Part #: TA-250-08E

    For Use With: Air trolley assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement male elbow swivel.

    Add to Quote
  • Air Cylinder

    Air Cylinder

    Part #: TA-250-09C

    For Use With: Air trolley assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement air cylinder.

    Add to Quote
  • Axle

    Axle

    Part #: TA-250-10A

    For Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement nip wheel mounting axle.

    Add to Quote
  • Modified Axle

    Modified Axle

    Part #: TA-250-10A-MOD

    For Use With: Vits and WPM/AGM air trolley slitter conversion kits on angle bars, seam gluers, prefolders, pattern perforators, and plow towers.

    Features:
    -Modified axle to covert single nip wheel assembly into a slitter/perf/score wheel assembly.

    Part# TA-250-10A-MOD replaces standard axle #TA-250-10A to allow for slitter, perforation, or score wheel use.

    Add to Quote
  • Guard

    Guard

    Part #: TA-250-11G

    For Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement two-piece guard.

    Add to Quote
  • Washer (Spacer)

    Washer (Spacer)

    Part #: TA-250-11W

    For Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement washer (spacer) for nip wheel.
    – Two washers needed per single nip wheel assembly.

    Add to Quote
  • Flat Head Mounting Screws

    Flat Head Mounting Screws

    Part #: TA-91253

    For Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement flat head socket cap screw.
    – Mounts yoke legs to yoke block.
    – Four screws needed per single nip wheel assembly.

    Add to Quote
  • Mounting Screws

    Mounting Screws

    Part #: TA-91255

    For Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.

    Features:
    – Replacement mounting button head socket cap screw.
    – Mounts nip wheel to yoke and axle.
    – Two screws needed per single nip wheel assembly.

    Add to Quote
  • Turn Knob

    Turn Knob

    Part #: TK-4187

    For Use With: Vits and WPM/AGM plow folding equipment – 4.187″ diameter.

    Features:
    – Precision machined to meet or exceed OEM specifications.

    Add to Quote
  • Nip Wheel - White Delrin - 2.50" OD

    Nip Wheel – White Delrin – 2.50″ OD

    Part #: TW-250-1-W

    For Use With: Vits air trolley wheel assemblies and WPM/AGM single wheel air trolley assemblies.

    Features:
    – Standard replacement air trolley wheel.
    – 2.50″ OD x 1.25″ ID x .9375″ Wide
    – .475″ bearing ID
    – Manufactured from delrin and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
    – Meets or exceeds OEM specifications.

    Add to Quote
  • Nip Wheel - Red Polyurethane - 2.50" OD

    Nip Wheel – Red Polyurethane – 2.50″ OD

    Part #: TW-250-2-RU

    For Use With: Vits air trolley wheel assemblies and WPM single wheel air trolley assemblies.

    Features:
    – Standard replacement air trolley wheel.
    – 2.50″ OD x 1.25″ ID x .9375″ Wide
    – .475″ bearing ID
    – Manufactured from red polyurethane and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
    – Meets or exceeds OEM specifications.

    Add to Quote
  • Nip Wheel - Blue Urethane - 2.50" OD

    Nip Wheel – Blue Urethane – 2.50″ OD

    Part #: TW-250-4-P

    For Use With:  Vits air trolley wheel assemblies and WPM single wheel air trolley assemblies.

    Features:
    – Standard replacement air trolley wheel.
    – 2.50″ OD x 1.25″ ID x .9375″ Wide
    – .475″ bearing ID
    – Manufactured from blue urethane and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
    – Meets or exceeds OEM specifications.

    Add to Quote
  • Recovered Nip Wheel - Blue Urethane - 2.50" OD

    Recovered Nip Wheel – Blue Urethane – 2.50″ OD

    Part #: TW-250-OR

    For Use With: Vits air trolley wheel assemblies and WPM single wheel air trolley assemblies.

    Ship us your existing worn nip wheels and our recovering service will remove and replace the covering and bearings. NO MINIMUMS

    Features:
    – Allows reuse of nip wheels
    – New blue urethane covering and new set of bearings
    – Standard replacement air trolley wheel.
    – 2.50″ OD x 1.25″ ID x .9375″ Wide
    – .475″ bearing ID
    – Manufactured from blue urethane and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
    – Meets or exceeds OEM specifications.

    Add to Quote
  • Nip Wheel - Red Urethane - 2.50" OD

    Nip Wheel – Red Urethane – 2.50″ OD

    Part #: TW-250-V

    For Use With: Vits air trolley assemblies.

    Features:
    – Standard replacement trolley wheel.
    – 2.50″ OD x 1.50″ ID x 1.250″ Wide
    – .375″ bearing ID
    – Manufactured from red urethane and supplied with high-quality, double sealed, 1614Z low friction bearings- Qty 2
    – Meets or exceeds OEM specifications.

    Add to Quote
  • Recovered Nip Wheel - Red Urethane - 2.50" OD

    Recovered Nip Wheel – Red Urethane – 2.50″ OD

    Part #: TW-250-V-OR

    For Use With: Vits air trolley assemblies.

    Ship us your existing worn nip wheels and our recovering service will remove and replace the covering and bearings.

    Features:
    – Allows reuse of nip wheels
    – New red urethane covering and new set of bearings
    – Standard replacement trolley wheel.
    – 2.50″ OD x 1.50″ ID x 1.250″ Wide
    – .375″ bearing ID
    – Manufactured from red urethane and supplied with high-quality, double sealed, 1614Z low friction bearings- Qty 2
    – Meets or exceeds OEM specifications.

    Add to Quote

    • Part not listed?

    We are experts at sourcing and manufacturing spare parts and consumables. We are confident that we can find or manufacture you the parts your operation needs!

    Request Unlisted Parts