Euroweb Ltd
KCO-250-35500 12" KCO Style - Double (Chip) Knife Holder Assembly - 17.750"/35.500" & 17.795"/35.590" Circ.

12" KCO Style - Double (Chip) Knife Holder Assembly - 17.750"/35.500" & 17.795"/35.590" Circ.

Part #: KCO-250-35500

Euroweb Ltd's exclusive design double (chip) knife holder assembly for use with Scheffer rotary cutters.

Features:
–  17.750"/35.500" & 17.795"/35.590" Circumference.
–  Can be configured to take chip cuts between 1/4" (.250") –  1/2" (.500") in size within a single knife holder.
–  Dual function knife holder –  Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
–  Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), chip spacer, and front plate.
–  Utilizes standard replacement 12" (4 notch) cutting blade.

Advantages:
–  Fast make-ready –  mount only one knife holder, instead of two, when taking chips.
–  Make-ready chip area with a single strip of foam rubber –  Save time and money by drastically reducing the need to cut, fold, trim, etc. multiple layers of foam rubber.
–  Greatly assists chip placement onto stripper pins for successful and consistent chip removal.
–  Provides for a rapid changeover of replacement cutting blades without removing the holder from the knife cylinder.

Please specify chip size when ordering.


KCO-250-45500 12" KCO Style - Double (Chip) Knife Holder Assembly - 22.750"/45.500" - 24.803"/49.606" Circ.

12" KCO Style - Double (Chip) Knife Holder Assembly - 22.750"/45.500" - 24.803"/49.606" Circ.

Part #: KCO-250-45500

Euroweb Ltd's exclusive design double (chip) knife holder assembly for use with Scheffer rotary cutters.

Features:
–  22.750"/45.500", 22.776"/45.552", 22.8375"/45.675", 23.00"/46.00" & 24.803"/49.606" Circumference.
–  Can be configured to take chip cuts between 1/4" (.250") –  1/2" (.500") in size within a single knife holder.
–  Dual function knife holder –  Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
–  Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), chip spacer, and front plate.
–  Utilizes standard replacement 12" (4 notch) cutting blade.

Advantages:
–  Fast make-ready –  mount only one knife holder, instead of two, when taking chips.
–  Make-ready chip area with a single strip of foam rubber –  Save time and money by drastically reducing the need to cut, fold, trim, etc. multiple layers of foam rubber.
–  Greatly assists chip placement onto stripper pins for successful and consistent chip removal.
–  Provides for a rapid changeover of replacement cutting blades without removing the holder from the knife cylinder.

Please specify chip size when ordering.

KCO-250-E Modified Swing Hinge Connector

Modified Swing Hinge Connector

Part #: KCO-250-E

For Use With: 12" KCO Style Double (Chip) Knife Holder Assembly

Features:
–  Modified swing hinge connector allows for 1/4" chip spacer and front plate lockup.
KCO-500-E Modified Swing Hinge Connector

Modified Swing Hinge Connector

Part #: KCO-500-E

For Use With: 12" KCO Style Double (Chip) Knife Holder Assembly

Features:
–  Modified swing hinge connector allows for 1/2" chip spacer and front plate lockup.
PL-250-12 Front Plate

Front Plate

Part #: PL-250-12

For Use With: 12" KCO Style Double (Chip) Knife Holder Assembly

Features:
–  Standard replacement front plate.
–  12" Long
Please Call Custom Chip Size Spacers

Custom Chip Size Spacers

Part #: Please Call

For Use With: 12" KCO Style Double (Chip) Knife Holder Assembly

Features:
–  12" Long
–  Custom chip spacers can be manufactured in sizes from 1/4" (.250") –  1/2" (.500").

Please specify chip size and circumference of rotary cutter when ordering.